JT5DT-1Water Temperature Meter of scooter parts

1.JT5DT-1 Water Temperature Meter of scooter parts 2.Working voltage:DC8-28V 3.High quality 4.Competitive price

Degrees CelsiuProduct name: JT5DT-1 Water Temperature Meter of scooter parts

Technical Specifications:

1.Working voltage:DC8—28V

2.Temperature measurement range:0--120 Degrees Celsius

3.Measurement error: ±1 Degrees Celsius

Installation and use of:

1. fixed the measurement table to the prople position of instrument sets,

and than installment the water temperature sensor plugs which matching the measurement table to the engine cooling Cean waterways (or replace the original car temperature sensor plugs). Finally, measure the table received a key to positive power line to control the power supply line, then car metal body negative.

2.Product wiring diagram

3.Turn on the power switch,measuring the table began to work into self-test status instrument,all the digital display as “8”,1 second into the working state automatically.Lower left corner of the window displays the current engine oil pressure,water temperature upper right corner of the window displays the current temperature,lower right corner of the window shows the current voltage.

4. Alarm function

（1）Sensor Failure Alarm

When the temperature display window shows "UU" or "00", the temperature sensor plug that have open or short circuit fault line

（2）Temperature, over-temperature alarm

When the water temperature more than 95Degrees Celsius less than 99Degrees Celsius, the measured surface temperature digital display will alternately show the actual temperature and “≡≡”, accompanied by beeps

When the temperature rose to 100 Degrees Celsius, the measurement of surface temperature display shows "00" and 30 accompanied by beeps

（3）Oil Pressure Alarm

Sensors require the use of 153 oil sensor (coarse, fine tooth can be), the instrument lines connected to the oil sensor G terminal on the instrument with digital display on the oil pressure. When the oil pressure less than 0.5KG, the figure shown as "0" indicates low oil pressure alarm.

Notes:

1. Installation, meter connection as far as possible away from interference sources, such as speakers, power lines, so as not to affect the instrument to work

2. Mounting bracket with ordinary flashlight can stand (provided)

3. Connection with the corresponding color, position, when use 8mm sensing, the installation should not force too much, so as not to wring

4. Installation location must not be the sun and light, rain

JT5DT-1Water Temperature Meter of scooter parts